|Place of Origin:||China|
|Minimum Order Quantity:||10PCS|
|Packaging Details:||white carton|
|Delivery Time:||30 work days|
TiN coating HSS circular knife, saw blade for cold cutting of tube and pipe
Hss circular saw blade is often used in cutting medium hardness metal materials, such as steel, iron, aluminum and copper, which can also be used in milling other non-metallic materials.
Our tools have been used for a wide range of applications. The quality of our products has enabled us to cooperate with more and more customer around the world.
M2,M35, DMo5, DMo6,W6,W9
1. Polished.(white )
2. Steam-treated (black colour)
3. TiN-coated (golden colour)
4. TiCN –coated (Violet colour)
5. TiALN-coated (Black-Violet colour)
6. CrN-coated (Metallic-grey colour)
Surface Treatment: VAPO, TIN, TIAIN, TICN
Tooth Type: A/ AW/ B/ BW/ C
Bore Diameter: 32mm, 40mm, 50mm, or as request.
VAPO: Special Oxidation, It produces a large of iron oxide( Fe3O4) on the surface, which increases the wear-resistance and overall life, suitable for cutting general material.
TIN: Titanium Nitride Coating, it’s an excellent PVD coating for protecting saw blade from wear. It is a good choice for iron based materials and cutting condition’s requiring resistance to both abrasive and adhesive wear.
TIAIN: Titanium Aluminum Nitride Coating, this coating is a new multi-layer wear protecting PVD coating. Recommended for high tensile strength material above 800N/mm and stainless steel, responds very favorably to high speed and feed rates as rates well as extreme working conditions like dry cutting.
TICN: Titanium Carbon Nitride Coating. It is a high performance PVD coating, suitable for severe abrasive wear cutting conditions, recommend for high tensile strength materials above 800N/mm and stainless steel, especially for cutting the material in high speed and feed rate.
The Metal Cutting Tool saw blades are used on manual, semi-automatic and fully automatic sawing machines to cut tubes and pipes, open sections and solid sections up to 200 mm. It's suitable for cutting off steels and alloys with hardness between 500N/mm2 and 800N/mm2.
The HSS circular saw blades are mainly ised in automobile, motorcycle manufacturing, stainless steel furniture industry, thick-walled metal pipe factory, bicycles, baby carriage industry and building decoration industry.
Tooth “A”: This is usually used for cutting mild steel which is easy to be cut off. It is accepted 2mm-4mm pitch or more.
Tooth “AW”: This tooth type is almost same as tooth A, except for chamfering in turns. Nowadays, this type is hardly used, and tooth A and tooth BW are used instead of this type.
Tooth “B”: Because it is changed straight part of A into curve, the gullet of chip is bigger, makes it be able to cut the thicker material.
Tooth “BW”: This type is almost same as B, except for chamfering in turns. The load is less than B, and it is suitable for cutting thick material. This type is applied to cut nonferrous pipe, profile and heavy metal solid bar. Usually, A or B is used in cutter, and BW or C is used in saw.
Tooth “C”: goes by the name of high-lowe form. The difference of contiguous tooth is 0.15mm-0.3mm. It has good performance in cutting round solid bar, rectangular solid bar, heavy metal and thick pipe.
|Diameter mm||Bore mm||Thickness mm||Teeth profile||Surface coating|
|160||32||1.2/1.5/2.0||Aw A B Bw||VAPO TIN CrN TIALN TICN|