Sales & Support: Request A Quote
Home ProductsTungsten carbide tipped saw blade

Cold cut 700mm tungsten carbide tipped saw blade for cutting H beam, angle,and square hollow

Cold cut 700mm tungsten carbide tipped saw blade for cutting H beam, angle,and square hollow

    • Cold cut 700mm tungsten carbide tipped saw blade for cutting H beam, angle,and square hollow
    • Cold cut 700mm tungsten carbide tipped saw blade for cutting H beam, angle,and square hollow
    • Cold cut 700mm tungsten carbide tipped saw blade for cutting H beam, angle,and square hollow
  • Cold cut 700mm tungsten carbide tipped saw blade for cutting H beam, angle,and square hollow

    Product Details:

    Place of Origin: China
    Brand Name: EFFEMAX
    Certification: No
    Model Number: TCT

    Payment & Shipping Terms:

    Minimum Order Quantity: 5pcs
    Price: 300-500 USD/PC
    Packaging Details: fumigation free wooden case
    Delivery Time: 30 days
    Payment Terms: T/T
    Supply Ability: 500pcs/m
    Contact Now
    Detailed Product Description
    Material: 8CrV Tips: Carbide
    Teeth Number: 140z Cutting Material: Metal
    Dia: 700mm

    Tungsten carbide tipped saw blade for cutting H beam, I beam, angle,channel and square hollow

     

    Tungsten Carbide-Tipped (TCT) cold saw blades are made with an alloy steel body and tungsten carbide inserts brazed to the tips of the teeth. These tips are ground on all surfaces to create tangential and radial clearance and provide the proper cutting and clearance angles on the teeth. The alloy body is generally made from a wear resistant material such as a chrome vanadium steel, heat treated to 38/42 HRc . The tungsten carbide tips are capable of operating at much higher temperatures than solid HSS cold saw blades, therefore, TCT cold saw blades are usually run at much higher surface speeds. This allows carbide-tipped blades to cut at faster rates and still maintain an acceptable chip load per tooth. The tungsten carbide inserts are extremely hard (98 HRc) and capable of very long wear life. However, they are less resistant to shock than solid HSS cold saw blades. Any vibration during the cutting process may severely damage the teeth.

     

    Carbide Tipped

    Tubes and solids

    Stainless steel, alloy steel and special purpose steel

    Carbon content greater than .45%

     

    Coated Carbide Tipped

    Tubes and solids

    High carbon steel alloys

    Reduces heat-wear and distortion

     

    Advantages:

    Lower cost per cut

    Wide variety of tooth counts to accommodate your part

    Stiff and extremely flat plates ensure distortion-free accurate cuts

    Increased productivity (less downtime)

    Excellent cut quality

     

    Cutting materials suggested:

    Mild low carbon steel

    Stainless steel

    High carbon steel

    Solids and pipe

     

    Cold cut 700mm tungsten carbide tipped saw blade for cutting H beam, angle,and square hollow

     

    Cold cut 700mm tungsten carbide tipped saw blade for cutting H beam, angle,and square hollow

     

    Diameter Bore hole Diameter of Pin Hole PCD of Pin Holes Thickness Cutting width Number of Teeth
    350 30 12 80 2.2 3.2 100,120
    500 32 12 100 2.8 3.8 100,128
    610 50 15 120 4.2 5.2 90,120
    800 80 15 150 5.5 7.0 100,120
    1000 100 18 200 6.5 8.0 120,160
    1250 100 22 250 6.5 8.0 180,200
    1400 100 22 250 7.0 8.5 200,220
    1560 120 25 280 8.0 9.5 220,240
    1800 150 30 300 8.5 10.0 230,250
    Diameter Bore hole Diameter of Pin Hole PCD of Pin Holes Thickness Cutting width Number of Teeth
    700 80 18 180 4.5 6.5 64,72
    810 80 20 200 5.0 7.0 60,72
    1000 100 20 220 5.5 7.5 72,80
    1200 100 22 250 6.5 8.5 80,100
    1600 200 25 300 8.5 10.5 72,80
    1800 240 30 350 10.5 14.5 60,72
    2000 240 30 350 11.0 15.0 70,100
    2200 240 30 350 11.5 15.5 90,120

    Contact Details
    Effemax global industrial co.,limited

    Contact Person: Mrs. Emma

    Tel: 86-315-2871654

    Fax: 86-315-2871654

    Send your inquiry directly to us (0 / 3000)